Lexmark T630n Service Manual - Page 147
Print tests, Print Contrast, Charge Roll
UPC - 734646532211
View all Lexmark T630n manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 147 highlights
Print Contrast The print contrast setting controls the developer voltage offset. The print contrast can be adjusted to: LOW, MEDIUM, HIGH Charge Roll The charge roll can be adjusted to: LOW, MEDIUM, HIGH 4060-xxx Print tests The purpose of the diagnostic Print Tests is to verify that the printer can print on media from each of the installed input options. Each of the installed options is listed in the following order in the menu: Tray 1 Tray 2 (if installed) Tray 3 (if installed) Tray 4 (if installed) Tray 5 (if installed) Multipurpose Feeder (if installed) Envelope Feeder (if installed) For each input source selected you have the following choices: • Single (prints the Print Test Page once) • Continuous (continue printing the Print Test Page until Return or Stop is pressed). The contents of the Print Test Page varies depending on the media installed in the selected input source. Note: The Print Test Page always prints on one side of the paper, regardless of the duplex setting or the presence of a duplex option. If a source is selected that contains envelopes, an envelope test pattern is printed. If Continuous is selected, the test pattern is printed only on the first envelope. To run the Print Test Page: 1. Select Print Tests from the Diagnostic menu. 2. Select the media source. 3. Select Single or Continuous. • If Single is selected no buttons are active during printing. • If Continuous is selected, Return or Stop can be selected to cancel the test. Check each Test Page from each source to assist in print quality and paper feed problems. Diagnostic aids 3-19