Lexmark T632 Setup Guide - Page 13
Installing the 2000sheet drawer - configuration page
View all Lexmark T632 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Installing the 2000-sheet drawer Note: Your drawer is pre-configured to either letter or A4 paper size. To use a different paper size, see "Changing the 2000-sheet drawer paper size" on page 10 before placing any options or the printer on the 2000-sheet drawer. Decide on an installation location for the 2000-sheet drawer. The printer, and possibly other options, will be placed on top of the drawer, so allow at least 137.16 cm (4.5 ft) for clearance. 1 If you are installing the 2000-sheet drawer sometime after setting up the printer, turn the printer power off and unplug the power cord. Disconnect any other cables attached to the printer. 2 Place the printer on top of the drawer and any options installed. The openings on top of the drawer help you set the printer so the edges are aligned properly. Make sure the printer is securely in place. CAUTION: Make sure your fingers are not under the printer when you set it down. Use the handholds on the printer or ask someone to help you lift it. Set up the printer and print media handling options 8