Lexmark T632 Setup Guide - Page 39
Installing an optioncard, RS-232 Serial Interface Card
View all Lexmark T632 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Warning: Optional flash memory and firmware cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card. Metal pins Plastic pins 1 Unpack the flash memory or firmware card. Avoid touching the metal pins on the bottom of the card. Save the packaging. Cards Note: The row of metal pins on the firmware card must be fully inserted along its entire length. 2 Holding the flash memory or firmware card by its sides, align the plastic pins on the card with the holes on the system board. If you are installing two cards, use the bottom system board connection first, and then the top one. 3 Push in until the flash memory or firmware card is firmly in place. Installing an option card Your printer has either one or two connectors that support the following option cards: • Hard disk with adapter card • MarkNet internal print server • RS-232 Serial Interface Card Install memory and option cards 34