Lexmark T634 User's Reference - Page 265
DO NOT TURN POWER OFF, Close Door or Insert - scanner
View all Lexmark T634 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 265 highlights
Understanding the printer messages Message What this message means What you can do Change Cartridge Invalid Refill The printer has detected a refilled Prebate cartridge. Remove the indicated print cartridge and install a new one. See also: Replacing the print cartridge Check Connection The specified device is either not fully connected to the printer or is experiencing a hardware failure. means: • Tray x with x being trays 2 - 5 • Duplex • Reestablish communication by removing the specified device and reattaching it to the printer. • Press Go to clear the message and continue printing. • In the case of a hardware failure, turn the printer off and back on. If the error recurs, turn the printer off, remove the specified device, and call for service. Clearing Job Accounting Stat The printer is deleting all job statistics Wait for the message to clear. stored on the hard disk. Close Door or Insert Cartridge The upper front door is open or the toner cartridge is not installed. • Close the upper front door. • Install the print cartridge. Close Finisher Door The finisher side door is open. Close the finisher side door to clear the message. Close Finisher Top Cover The finisher top cover is open. Close the finisher top cover to clear the message. Copying The printer is processing a copy job originating from an OptraImage™ scanner. Wait for the message to clear. Defragmenting The printer is defragmenting the flash Wait for the message to clear. DO NOT TURN POWER OFF memory to reclaim storage space occupied by deleted resources. Warning: Do not turn the printer off while this message is displayed. Delete All Jobs Go/Stop? The printer is requesting confirmation to delete all held jobs. • Press Go to continue. The printer deletes all held jobs. • Press Stop to cancel the operation. Deleting Jobs The printer is deleting one or more held jobs. Wait for the message to clear. Disabling Menus The printer is responding to a request to disable the menus. Wait for the message to clear. Note: While the menus are disabled, you cannot change the printer settings from the operator panel. See also: Disabling operator panel menus 265