Lexmark W812 User's Reference - Page 73
Removing a firmware card
![]() |
View all Lexmark W812 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Removing a firmware card Complete the following steps to remove a firmware card. If an option card has been installed, you must remove it before removing the firmware card. See Removing an option card. WARNING: Optional firmware cards are easily damaged by static electricity. Touch something metal on the printer before you touch an optional firmware card. 1 Remove the access panel (see Removing the printer system board access panel for help). 2 Gently pull the firmware card straight out in one motion. Do not pull one side and then the other. 3 Place the card in its original packaging, or wrap the card in paper and store it in a box. 4 Replace the access panel (see Reinstalling the system board access panel). 73
![](/manual_guide/products/lexmark-812tn-users-reference-88d0148/73.png)
73
Removing a firmware card
Complete the following steps to remove a firmware card. If an option card has been installed, you must
remove it before removing the firmware card. See
Removing an option card
.
W
ARNING
:
Optional firmware cards are easily damaged by static electricity. Touch something
metal on the printer before you touch an optional firmware card.
1
Remove the access panel (see
Removing the printer system board access panel
for help).
2
Gently pull the firmware card straight out in one motion. Do not pull one side and then the
other.
3
Place the card in its original packaging, or wrap the card in paper and store it in a box.
4
Replace the access panel (see
Reinstalling the system board access panel
).