Lexmark W840 Quick Reference - Page 2

6 Slide the width guides until they lightly rest against the edge of the media. 7 Set the Paper Size and Paper Type for the multipurpose feeder (MP Feeder Size and MP Feeder Type) to the correct value for the print media you loaded. Loading the 2000-sheet dual input trays The 2000-sheet dual input drawer includes two trays: an 850-sheet tray and an 1150-sheet tray. Although the trays are different in appearance, they both load the same way. 1 Pull out the tray. Note: Make sure the print media is below the max fill line on the rear guide. Overloading may cause jams. 5 Insert the tray into the printer. Loading the 2000-sheet high capacity feeder 1 Pull out the tray. 2 Squeeze the front guide tab, and slide the guide to the correct position for the size media you are loading. 3 Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface. 2 If loading print media with a different width or length, adjust the width and length guides. 4 Load print media in the tray with the print side up. 3 Flex the sheets back and forth to loosen them, then fan them. Do not fold or crease the print media. Straighten the edges on a level surface.