Lexmark X264dn User's Guide - Page 180

Unsupported USB hub, please remove Remove the unrecognized USB hub. Some USB flash drives have a built-in USB hub, and these flash drives are not supported. USB/USB The printer is using a USB cable connection. The USB port is the active communication link. Waiting The printer has received data to print, but is waiting for an End-of-Job command, a Form Feed command, or additional data. • Press to print the contents of the buffer. • Cancel the current print job. Waiting for redial The printer is waiting to redial the fax number. Wait for the message to clear. 31.yy Replace defective or missing cartridge The toner cartridge is either missing or not functioning properly. Try one or more of the following: • Remove the toner cartridge, and then reinstall it. • Remove the toner cartridge, and then install a new one. 34 Short paper The printer paper size setting did not match the length of the paper that entered the printer. Try one or more of the following: • Press to clear the message and continue printing. • Press , and then press to cancel printing. • Make sure the paper size setting matches the size of the paper in the tray. 35 Insufficient memory to support Resource Save feature The printer lacks sufficient memory to save settings. Install additional memory, or press to disable Resource Save and continue printing. 37 Insufficient memory for Flash Memory Defragment operation Try one or more of the following: • Press the arrow buttons until Continue appears, and then press continue printing. • Delete fonts, macros, and other data in printer memory. • Install additional printer memory. to stop the defragment operation and Troubleshooting 180