Lexmark X644E Troubleshooting Guide - Page 1
Lexmark X644E - With Modem Taa/gov Manual
UPC - 734646093156
View all Lexmark X644E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
Lexmark™ X646 Troubleshooting Guide Online technical support Technical support is available on our Lexmark Web site at www.lexmark.com. Checking an unresponsive printer If the printer is not responding, first make sure: • The power cord is plugged into the printer and a properly grounded electrical outlet. • The electrical outlet is not turned off by any switch or breaker. • The printer is not plugged into any surge protectors, uninterrupted power supplies, or extension cords. • Other electrical equipment plugged into the outlet is working. • The printer is turned on. • The printer cable is securely attached to the printer and the host computer, print server, option, or other network device. Once you have checked each of these possibilities, turn the printer off and back on. This often fixes the problem. Printing multi-language PDFs 1 Open the document you want to print in Adobe Acrobat. 2 Click the printer icon. 3 Check the Print as image box. 4 Click OK. Solving printing problems The operator panel display is blank Turn the printer off, wait about 10 seconds, and turn the printer back on. If the Ready message does not appear, turn the printer off and call for service. The message USB device unsupported appears when using a USB device For information regarding tested and approved USB flash memory devices, see our Lexmark Web site at http://support.lexmark.com and click on KnowledgeBase to search for Direct USB printing. Jobs do not print The printer is not ready to receive data Make sure Ready or Power Saver appears on the display before sending a job to print. The specified output bin is full Remove the stack of paper from the output bin. The specified tray is empty Load paper in the tray. You are using the wrong printer driver or are printing to a file • Verify you are using the printer driver associated with the printer. • If you are using a USB port, make sure you are running Windows 98/Me, Windows 2000, Windows XP, or Windows Server 2003 and using a Windows 98/Me, Windows 2000, Windows XP, or Windows Server 2003 compatible printer driver. Your MarkNet N8000 series internal print server is not set up properly or is not connected properly Verify that you have properly configured the printer for network printing. See the drivers CD or the Lexmark Web site for information. You are using the wrong interface cable, or the cable is not securely connected Make sure you are using a recommended interface cable. Make sure the connection is secure. Held jobs do not print A formatting error has occurred • Print the job. (Only part of the job may print.) • Delete the job. • Free up additional printer memory by scrolling through the list of held jobs and deleting others you have sent to the printer. The printer has insufficient memory • Print the job. (Only part of the job may print.) • Delete the job. • Free up additional printer memory by scrolling through the list of held jobs and deleting others you have sent to the printer. The printer has received invalid data Delete the job. Job takes longer than expected to print The job is too complex Reduce the complexity of your print job by eliminating the number and size of fonts, the number and complexity of images, and the number of pages in the job.