Lexmark XC9445 Quick Reference - Page 15
Loading the envelope tray
View all Lexmark XC9445 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Note: Use the indicators on the bottom of the tray to position the guides. 6 Close the tray side door, and then insert the tray. If necessary, set the paper size and type to match the paper loaded in the tray. Note: When a finisher is installed, the images are rotated to 180° when printed. Loading the envelope tray CAUTION-TIPPING HAZARD: To reduce the risk of equipment instability, load each tray separately. Keep all other trays closed until needed. 1 Pull out the envelope tray. Note: To avoid jams, do not pull out trays while the printer is busy. 2 Flex, fan, and align the envelope edges before loading. 4 Load the envelopes with the flap side down and against the left side of the tray. Notes: • Make sure that the side guides fit snugly against the envelopes. • Make sure that the stack height is below the maximum fill indicator. Overfilling may cause jams. 3 Adjust the guides to match the size of the envelope that you are loading. 15