Lexmark XC9445 Quick Reference - Page 18

2 Click , and then select a printer. 3 From the Use menu, select a print driver. Notes: • To use the Macintosh print driver, select either AirPrint or Secure AirPrint. • If you want custom printing features, then select the manufacturer print driver. To install the driver, see "Installing the printer software" on page 17. 4 Add the printer. Connecting the printer to a Wi‑Fi network Make sure that Active Adapter is set to Auto. From the home screen, touch Settings > Network/Ports > Network Overview > Active Adapter. 1 From the home screen, touch Settings > Network/Ports > Wireless > Setup On Printer Panel > Choose Network. 2 Select a Wi‑Fi network, and then type the network password. Note: For Wi‑Fi‑network‑ready printer models, a prompt for Wi‑Fi network setup appears during initial setup. Configuring Wi‑Fi Direct Wi-Fi Direct® is a Wi-Fi-based peer-to-peer technology that allows wireless devices to connect directly to a Wi-Fi Direct‑enabled printer without using an access point (wireless router). 1 From the home screen, touch Settings > Network/Ports > WiFi Direct. 2 Configure the settings. • Enable Wi‑Fi Direct-Enables the printer to broadcast its own Wi‑Fi Direct network. • Wi‑Fi Direct Name-Assigns a name for the Wi‑Fi Direct network. • Wi‑Fi Direct Password-Assigns the password for negotiating the wireless security when using the peer‑topeer connection. • Show Password on Setup Page-Shows the password on the Network Setup Page. • Auto-Accept Push Button Requests-Lets the printer accept connection requests automatically. Note: Accepting push‑button requests automatically is not secured. Notes: • By default, the Wi-Fi Direct network password is not visible on the printer display. To show the password, enable the password peek icon. From the home screen, touch Settings > Security > Miscellaneous > Enable Password/PIN Reveal. • To know the password of the Wi-Fi Direct network without showing it on the printer display, from the home screen touch Settings > Reports > Network > Network Setup Page. Connecting a computer to the printer Before connecting your computer, make sure that Wi‑Fi Direct has been configured. For more information, see "Configuring Wi‑Fi Direct" on page 18. For Windows users 1 Open Printers & scanners, and then click Add a printer or scanner. 2 Click Show Wi-Fi Direct printers, and then select the printer Wi‑Fi Direct name. 3 From the printer display, take note of the eight-digit PIN of the printer. 4 Enter the PIN on the computer. Note: If the print driver is not already installed, then Windows downloads the appropriate driver. For Macintosh users 1 Click the wireless icon, and then select the printer Wi‑Fi Direct name. Note: The string DIRECT-xy (where x and y are two random characters) is added before the Wi-Fi Direct name. 2 Type the Wi‑Fi Direct password. Note: Switch your computer back to its previous network after disconnecting from the Wi-Fi Direct network. Connecting a mobile device to the printer Before connecting your mobile device, make sure that Wi‑Fi Direct has been configured. For more information, see "Configuring Wi‑Fi Direct" on page 18. Connecting using Wi‑Fi Direct Note: These instructions apply only to Android mobile devices. 1 From the mobile device, go to the settings menu. 2 Enable Wi‑Fi, and then tap Wi‑Fi Direct. 3 Select the printer Wi-Fi Direct name. 4 Confirm the connection on the printer control panel. Connecting using Wi‑Fi 1 From the mobile device, go to the settings menu. 2 Tap Wi‑Fi, and then select the printer Wi-Fi Direct name. Note: The string DIRECT-xy (where x and y are two random characters) is added before the Wi-Fi Direct name. 3 Enter the Wi-Fi Direct password. Clearing jams Identifying jam locations Notes: • When Jam Assist is set to On, the printer flushes blank pages or pages with partial prints after a jammed page has been cleared. Check your printed output for blank pages. • When Jam Recovery is set to On or Auto, the printer reprints jammed pages. 18