Lexmark XS925de Card Stock & Label Guide - Page 107
Lexmark W840
View all Lexmark XS925de manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
Printer specifications 107 • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. • Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • Set the Paper Type to Card Stock. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain long card stock. Lexmark W840 Limit label printing to occasional use of A4‑ or letter‑size paper office labels designed for laser printers. We do not recommend using vinyl or polyester labels. The Lexmark W840 supports stocks up to 216 g/m2. Always feed labels and card stock from Tray 1, 2, or the multipurpose feeder. The following table lists the maximum weights supported by the trays and the multipurpose feeder. Tray 1 Tray 2 Multipurpose feeder Labels 64-105 g/m2 64-216 g/m2 64-216 g/m2 Card stock 64-105 g/m2 64-216 g/m2 64-216 g/m2 Labels Card stock Width: 89-297 mm (3.5-11.7 in.) Length: 99-432 mm (3.9-17 in.) Weight: 64-216 g/m2 Thickness: Up to 0.25 mm Smoothness: 100-400 Sheffield* * 150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in printing degradation. Width: 89-297 mm (3.5-11.7 in.) Length: 99-432 mm (3.9-17 in.) Weight: Up to 216 g/m2