Lexmark XS925de Card Stock & Label Guide - Page 61
cut, the edge of the label or the perforations, or between the die
View all Lexmark XS925de manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Printer specifications 61 Labels Card stock Width: 210-216 mm (8.3-8.5 in.) Length: 279-356 mm (11-11.7 in.) Weight: 120-128 g/m2 Thickness: 0.13-0.20 mm (0.005-0.008 in.) Smoothness: 100-400 Sheffield* * 150-250 Sheffield is optimal. Using media higher than 300 Sheffield could result in print quality degradation. Width: 210-216 mm (8.3-8.5 in.) Length: 279-356 mm (11-11.7 in.) Weight: Up to 220 g/m2 Card stock and label guidelines When printing on labels: • Load labels only on the multipurpose feeder. • From the printer control panel, set Paper Type to Labels in the Paper Menu. • Do not use label sheets with a slick backing material. • Do not print within 1 mm (0.04 in.) of the die‑cut, the edge of the label or the perforations, or between the die‑cuts. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. • Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.04 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • From the printer control panel, set Paper Type to Card Stock. • Do not use creased card stock. It may cause paper jams. • We recommend the use of grain long card stock.