Lexmark XS925de Card Stock & Label Guide - Page 167
Set the Paper Type to Labels in the Paper Menu.
View all Lexmark XS925de manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 167 highlights
Printer specifications 167 Card stock Width: Length: Weight: 210-216 mm (8.3-8.5 in.) 279-356 mm (11-11.7 in.) Up to 163 g/m2 Index Bristol (90 lb) Card stock and label guidelines When printing on labels: • Set the Paper Type to Labels in the Paper Menu. • Do not use label sheets with a slick backing material. • Do not print within 1 mm (0.040 in.) of the die-cut, the edge of the label, the perforations, or between the die-cuts. • Use full label sheets. Partial sheets may cause labels to peel off during printing, resulting in a paper jam. • Do not use label sheets that have adhesive to the edge of the sheet. We recommend zone coating of the adhesive at least 1 mm (0.040 in.) away from the edges. Adhesive material may contaminate your printer and could void your warranty. When printing on card stock: • Set the Paper Type to Plain Paper. The Optra W810 treats card stock the same as Plain Paper. It does not adjust the print speed or fuser temperature when the Paper Type is set to Card Stock. • Do not use card stock that is creased. It may cause paper jams. • We recommend the use of grain long card stock.