Lexmark Z12 Color Jetprinter User's Guide for Windows 2000 (2.3 MB) - Page 49

Steps to basic printing Maintaining your printer Troubleshooting Appendix Appendix 3 Select Create Diskettes. 4 Follow the instructions on the screen. To install the printer software from diskettes: 1 Start Windows. 2 Insert Setup Disk 1 into your disk drive. 3 From the Start menu, select Run. 4 In the command-line text box, type the letter of your disk drive, followed by :\setup (for example, a:\setup), and then click OK. 5 When prompted by the printer software, insert the appropriate disks into your disk drive, and click OK. 6 Follow the instructions on the screen. Uninstalling printer software If your printer software does not install properly, you may need to uninstall, and then reinstall it. To uninstall the printer software: 1 From the Start menu, select Programs. 2 Select Lexmark Z12 Series. 3 Select Uninstall. 4 Follow the instructions on your screen. To reinstall the printer software, follow the appropriate set of instructions from "Installing printer software" on page 48. Power supply If your power supply fails, replace it with the Lexmark replacement part or other UL LISTED Direct Plug-In Power Unit marked "Class 2" and rated 30 V dc at 500mA. Safety information • If your product is NOT marked with this symbol , it MUST be connected to an electrical outlet that is properly grounded. • The power cord must be connected to an electrical outlet that is near the product and easily accessible. • Refer service or repairs, other than those described in the operating instructions, to a professional service person. • This product is designed, tested and approved to meet strict global safety standards with the use of specific Lexmark components. The safety features of some parts may not always be obvious. Lexmark is not responsible for the use of other replacement parts. Index 49