Lexmark Z601 User's Guide for Windows - Page 6

The following table describes each part. Use this: Power/Resume button Front cover Paper exit tray Paper guide and release tab Paper support Power supply connector Sheet feeder USB cable connector When you want to: • Turn the printer on or off. • Eject paper from the printer. For more information, see "Printer has a paper jam" on page 57. • Check the printer status. For more information, see "Understanding error messages and flashing lights" on page 53. • Install or change print cartridges. • Clear paper jams. Stack paper after printing. Make sure paper feeds correctly into the printer. Keep paper straight in the sheet feeder. Supply power to the printer. Feed paper automatically. For information about the amount of paper you can load, see "Printing ideas" on page 10. Connect the printer to the computer. Understanding the printer software Your printer software works with your operating system to print documents with superior results. This software has two parts: the Printer driver and the Lexmark Solution Center. Printer driver You can change your printer settings in the printer driver. To print a typical document on plain paper, you do not need to change your printer settings. When you install the printer software, the Page Setup dialog box and the Print dialog box are set to these default settings: Understanding the printer software 6