LiftMaster 8580WLB Owners Manual - Page 10
MODELS 8587W, 8587WL, AND 8580WLB, Models 8587W and 8587WL Only
View all LiftMaster 8580WLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Assembly 1 Attach the Rail to the Garage Door Opener MODELS 8587W, 8587WL, AND 8580WLB To avoid SERIOUS damage to garage door opener, use ONLY those bolts/fasteners mounted in the top of the opener. NOTE: ONLY use the bolts removed from the garage door opener. Place the garage door opener on the packing material to prevent scratching. 1. Remove bolt and lock nut from the top of the garage door opener. 2. Align the rail and the styrofoam over the sprocket. Cut the tape from the rail, chain, and styrofoam. 3. Fasten the rail with the previously removed washered bolt and lock nut. 4. Position the chain around the garage door opener sprocket. 5. Attach the chain spreader to the garage door opener with screws. 6. Models 8587W and 8587WL Only: Guide the chain around the selected groove in the chain spreader, to engage either the 8-tooth or 6-tooth sprocket. NOTE: The 6-tooth sprocket is for use with Carriage House Doors and the 8-tooth sprocket is for use with regular doors. HARDWARE Washered Bolt 5/16"-18x1/2" (Mounted in the garage door opener) Lock Nut (Mounted in the garage door opener) Washered Bolt 5/16"-18x1/2" Lock Nut Hex Screws 8-32x1" Washers Models 8587W and 8587WLB only Chain Spreader 6-Tooth Sprocket Chain Spreader 8-Tooth Sprocket Motor Unit Mounting Plate Motor Unit Mounting Plate 10