LiftMaster 8580WLB Owners Manual - Page 11
Attach the Chassis Support Bracket, Tighten the Chain, Do not, overtighten, Model 8580WLB Only
View all LiftMaster 8580WLB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Assembly 2 Attach the Chassis Support Bracket MODELS 8587W, 8587WL, AND 8580WLB To avoid possible SERIOUS INJURY to finger from moving garage door opener: l ALWAYS keep hand clear of sprocket while operating opener. l Securely attach sprocket cover BEFORE operating. 3 Tighten the Chain 1. Loosen the inner nut and lock washer on the trolley threaded shaft. 2. Tighten the outer nut until the chain is a 1/2" above the base of the rail at the midpoint of the rail. 3. Re-tighten the inner nut. Slack in the chain is normal when the door is closed. No readjustment is necessary. Model 8580WLB Only: If the tension is not correct with a 7' rail installed, remove two links from the chain to set the correct tension. 1. Position the chassis support bracket on the unit. 2. Attach the bracket to the rail with 1/4"-20 x 5/8" hex bolts and lock washers. Do not overtighten. 3. Attach the bracket to the opener by inserting a 5/16"-18 x 1/2" washered screw through a hole in each side flange and a matching hole in the bracket. Complete the connection by inserting the #8-32 x 3/8" screw through the back flange and the hole in rail support. Lock Washer Hex Bolt 1/4"-20x5/8" Screw #8-32x3/8" Washerd Bolt 5/16"-18x1/2" 1/2" (13 mm) 11