LiftMaster LA400 LA400 Manual - Page 16
» Position Gate Operator On Gate - installation
UPC - 753182403953
View all LiftMaster LA400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
INSTALLATION » POSITION GATE OPERATOR ON GATE POSITION GATE OPERATOR ON GATE NOTE: The post bracket assembly can be mounted several places on the gate post. Refer to page 11 for mounting options. 1 Open the gate to desired open position (no greater than 100°) and hold operator against gate. 2 Place the operator arm against gate post at the desired position. Temporarily secure gate post bracket with clamp. The gate operator (arm) must be level. 2 3 Mark mounting holes on gate for reference. Temporarily secure the gate bracket using a clamp. 4 Align the Pull-to-Open bracket to a position as CLOSE AS POSSIBLE above the screwdriver or dowel rod. 5 Insert hex bolt through Pull-to-Open bracket and post bracket and secure with washer, lock washer and nut. 1 3 4 7" (18 cm) 7" (18 cm) Hex Bolt 3/8" 5 Washer Lock Washer Nut 15