LiftMaster PPLX Installation Guide - Page 1
LiftMaster PPLX Manual
View all LiftMaster PPLX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
LiftMaster 0 PPLX READER INTRODUCTION The LiftMaster® PassportTM' PPLX reader is a programmable single-door access control system, which controls access for up to 50,000 users. It can control a gate operator, electric strike, magnetic lock, or commercial door operator. The reader contains the CPU, memory, access relay, and an internal reader. A Wiegand output is also provided to allow for later upgrading to an online system. The reader also has an additional programmable input, which may be set as a remote open input or as an LED control for use with the Wiegand output. It also has a beeper, and a bi-color LED indicator. The reader is capable of reading multiple Wiegand Card protocols. As a stand-alone access device, the reader has the ability to read 34 bit Passport1M, 30 bit Sentex®, and 26 bit industry standard card protocols. The PPRP Handheld Programmer (not provided) is required to program the reader. SPECIFICATIONS POWER REQUIREMENTS 5-14 Vdc, 50 mA idle, 150 mA Max. OUTPUTS SPST Solid State Relay, 1A max. @60 Vac or dc Normally open or normally closed (field programmable) (refer to Programming section). INPUTS Default is Remote Open (requires contact closure). Also programmable as Bi-color (Red or Green) LED Control or Buzzer/LED control for online systems (refer to Programming section). WIEGAND OUTPUT Any Wiegand Format up to 40 bits Maximum Distance: 500 ft. - 5 or 8 conductor 20 gauge shielded cable ENVIRONMENT Reader, Key Tags, and Cards: Ambient Temperature Humidity -40° to +70°C (-40° to +158°F) 0 to 95% (non-condensing) DIMENSIONS Reader 4 5" (h) x 3.2" (w) CARTON INVENTORY 0a1°s ,6,° 0 0 Mounting Plate PPLX Reader C:= Metal Oxide Varistor (MOV) (1) #6 Mounting Screws (2) Cable with Wiring Harness •o 4x40 Screw (1) NOT SHOWN Manual Log Sheet Security Screw (1) ACCESSORIES (NOT PROVIDED) CIE= CIE= MEI= CIE= ♦ PPRP Programmer 0o 0 Qei PS12D2A 12 Vdc Plug-In Power Supply Designed to power the PPLX Reader (90 mA) and other devices as needed up to total of 2.0 Amps. Requires 110 Volts AC power. 1 LiftMaster PPCSC Passport"' Proximity Cards