Linksys EG24M User Guide - Page 26

Linksys EtherFast® II Series IP & RIP SETTINGS If you select IP & RIP Settings from the IP Networking screen, an IP Settings screen similar to the following will appear, along with a list of the VLAN IDs, IP addresses, subnet masks, and frame types currently defined. 10/100 Managed 24-Port GigaSwitch ARP TABLE SETTINGS If you select ARP Table from the L3 IP Networking screen, an ARP Table screen similar to the following will appear with the ARP table entries that have already been defined or learned. Use the following procedure to modify the settings shown: 1. Use the Down Arrow key to highlight the row that contains the parameters you want to change, then press Enter. A screen similar to the following will appear, with the the IP Address field highlighted. 2. Review the settings. To change a setting, highlight it, press the Enter key, select the desired setting, and press Esc. 3. To delete a setting, highlight the setting and press the "-" (hyphen) key. When a message asks you to confirm the deletion, highlight Yes and press Enter to delete it. Press Esc or highlight No and press Enter to retain it. Note that by deleting the IP Address, any Telnet or Web connection will be disconnected. 4. When you finish, press the Esc key until you return to the desired screen. 44 From this screen, you are able to: • Add static entries to the ARP table. • Delete static entries to the ARP table. • Search for entries in the ARP table. Adding Static ARP Table Entries Use the following procedure to add static entries to the ARP table: 1. From the ARP Table screen, hold down the Shift key and press the "+" key. The Static ARP Specifications screen will appear, with the Internet Address field highlighted. 2. Press the Enter key. The Enter Internet Address screen (see next page) will appear. 45