Linksys EG24M User Guide - Page 40
UPGRADING FIRMWARE, Enter, Down Arrow
UPC - 745883549528
View all Linksys EG24M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Linksys EtherFast® II Series 4. Highlight the port you want to mirror from and press Enter. You will return to the Port Mirroring Options Screen and your selection will appear next to Mirror From. 5. Press the Down Arrow key to highlight Mirror Mode and press Enter. The Mode Options screen will appear. 10/100 Managed 24-Port GigaSwitch UPGRADING FIRMWARE Select File Transfer from the Advanced Management screen. The following File Transfer screen will appear, with the File Name value highlighted. Use the following procedure to change a value: 1. Press the Enter key. The Enter File Name screen will appear. 6. Highlight Receive or Transmit depending on whether the port to be mirrored from will be receiving or transmitting, then press Enter. Your selection will appear next to Mirror Mode in the Port Mirroring Options screen. 7. Press Esc. Your selections will appear in the following screen. 2. Type a name for the Software Upgrade file and press Enter. The name you typed will appear next to File Name. 3. Use the Down Arrow key to move to IP Address, then press Enter. The Enter IP Address screen will appear. 8. To mirror additional ports, repeat steps 2 through 7. 9. When you finish, press the Esc key until you return to the desired screen. 72 73