Linksys EG24M User Guide - Page 32

BRIDGING, Enter

Get Linksys EG24M - EtherFast II Switch PDF manuals and user guides
UPC - 745883549528
View all Linksys EG24M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 32 highlights

Linksys EtherFast® II Series 5. Type a packet count number from 1 to 999, or type 0 for an infinite packet count. Press Enter. 6. Move to Size and press Enter. The Enter Packet Size screen will appear. 10/100 Managed 24-Port GigaSwitch BRIDGING If you select Bridging from the Advanced Management screen, the following Bridging Parameters screen will appear. 7. Type the packet size, from 0 to 1500, then press Enter. 8. Move to Timeout and press Enter. The Enter Timeout screen will appear. 1. To change the aging time, highlight Aging Time and press Enter. The following prompt will ask you to enter a bridge aging period, in seconds. Enter a new aging period and press the Enter key. Enter 0 for no aging. 9. Type a timeout value, from 0 to 999, and press Enter. 10. When you finish specifying the ping parameters, press Esc to start pinging a remote IP address. 11. Press Esc again to return to the L3 IP Networking screen. 2. To change the flood limit for all ports, highlight Flood Limit for All ports , the following prompt will ask you to enter the flood limit, in packets per second. Enter a a new flood limit and press the Enter key. Enter 0 for no limit. 3. Press the Esc key until you return to the desired screen. 56 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
10/100 Managed 24-Port GigaSwitch
BRIDGING
If you select
Bridging
from the
Advanced Management
screen, the following
Bridging Parameters
screen will appear.
1. To change the aging time, highlight
Aging Time <seconds>
and press
Enter
. The following prompt will ask you to enter a bridge aging period,
in seconds. Enter a new aging period and press the
Enter
key. Enter 0 for
no aging.
2. To change the flood limit for all ports, highlight
Flood Limit for All ports
<pkt/s>
, the following prompt will ask you to enter the flood limit,
in packets per second. Enter a a new flood limit and press the
Enter
key.
Enter 0 for no limit.
3. Press the
Esc
key until you return to the desired screen.
57
Linksys EtherFast
®
II Series
5. Type a packet count number from 1 to 999, or type 0 for an infinite packet
count. Press
Enter
.
6. Move to
Size <mbytes>
and press
Enter
. The
Enter Packet Size
screen
will appear.
7. Type the packet size, from 0 to 1500, then press
Enter
.
8. Move to
Timeout <sec>
and press
Enter
. The
Enter Timeout
screen will
appear.
9. Type a timeout value, from 0 to 999, and press
Enter
.
10. When you finish specifying the ping parameters, press
Esc
to start ping-
ing a remote IP address.
11. Press
Esc
again to return to the
L3 IP Networking
screen.
56