Linksys PCMPC100U User Guide - Page 11

Instant EtherFast® Series Windows 98 Installation and Setup Overview After installing the EtherFast 10/100 PC Card hardware in your computer, follow these instructions to install the EtherFast 10/100 PC Card's Windows 98 network driver from the card's driver disk. Note: Screen shots used in this Installation and Setup section are from installation of the standard EtherFast 10/100 PC Card (PCMPC100 v3). If you are installing the EtherFast 10/100 Integrated PC Card (PCM100 v2), the installation process will be unchanged, however, the product name will be different. Please keep in mind that the installation procedure for the network driver will vary slightly depending on the version of Windows 98 you are using and your current system configuration. Installing the PC Card's Driver To install the network driver, Start up your computer. 1. The Add New Hardware Wizard window will appear. Click the Next button. If Windows 98 goes directly to the windows desktop and does not display this window, refer to the Troubleshooting section. EtherFast® 10/100 PC Cards 2. While the Update Device Driver Wizard window is visible, put the EtherFast 10/100 PC Card Driver Disk into the floppy drive and click the Next button. A window will appear and ask What do you want Windows to do? 3. Select Search for the best driver for your device (Recommended). Click the Next button. 4. A window will appear asking where you would like Windows 98 to search for the driver. Select "Specify a location" and enter A:\Win98 into the dropdown box. Click Next to continue. 16 17