Linksys SPA-841 Cisco SPA9000 Voice System Administration Guide - Page 192
Using the Resync URL, SYNTAX, EXAMPLE, resync?
View all Linksys SPA-841 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
Advanced Topics in SPA9000 Administration Remote Provisioning Features A spa.bin is assumed, as in the following example: http://192.168.2.217/ admin/upgrade?tftp://192.168.2.251/spa.bin Using the Resync URL The SPA9000 can be configured to automatically resynchronize its internal configuration state to a remote profile periodically and on power up. The automatic resyncs are controlled by configuring the desired profile URL into the device. NOTE The SPA resynchronizes only when it is idle. SYNTAX: http://spa-ip-addr/admin/resync?[[protocol://][servername[:port]]/profile-pathname] EXAMPLE: http://192.168.2.217/admin/resync?tftp:// 192.168.2.251/spaconf.cfg • If no parameter follows /resync?, the Profile Rule setting from the Provisioning page is used. • If no protocol is specified, TFTP is assumed. If no server-name is specified, the host that requests the URL is used as server-name. • If no port is specified, the default port is used (69 for TFTP, 80 for HTTP, and 443 for HTTPS). • The profile-path is the path to the new profile with which to resync. Using the Reboot URL You can use the Reboot URL to reboot the SPA9000. NOTE The SPA9000 reboots only when it is idle. SYNTAX: http://spa-ip-addr/admin/reboot EXAMPLE: http://192.168.2.217/admin/reboot SPA9000 Voice System Administration Guide 190