Logitech CC3000e Setup Guide - Page 5
Set up your product - camera cable
View all Logitech CC3000e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 5 highlights
Set up your product Logitech ConferenceCam CC3000e b c a 1. Set up camera on table, or using mount on table or wall. 2. Connect cable to speakerphone and camera (refer to diagram above). a. Attach Cable Lock to cable. b. Plug Cable Lock into the slot of the housing. c. Rotate the Cable Lock clockwise to lock the cable. 3. Connect to external power. The LCD will turn on and display the Logitech logo when receiving power. 4. To start a call from your PC or Mac application, connect the USB cable from the hub to your USB port. The speakerphone LCD will also prompt you to connect. The camera and speakerphone LEDs will flash to show that connection is taking place, and when completed, the camera head will rotate and the speakerphone will play a sound. If these activities do not take place, try again and then consult Troubleshooting or call technical support. English 5