Lowrance HDS-12 Gen3 Operators Manual US - Page 103
Trolling motor speed control, Speed adjustments, Autopilot Controller, Arrival mode, Set Spd, Set prop
View all Lowrance HDS-12 Gen3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 103 highlights
When you start navigating from an application (chart, steering, radar, and so on) you are prompted to engage the autopilot in Nav. mode. You can also initiate Nav. mode from the Autopilot Controller after navigation is started. When you reach the destination, the autopilot switches to your Arrival mode setting. Refer to "Autopilot settings" on page 104. Trolling motor speed control In navigation modes (Heading lock mode, Nav. mode, and Turn pattern steering) there are two ways to control speed: • Prop - selects a target propeller rate (percentage of power) shown as "%" in the Autopilot information bar. • Cruise - selects a target cruise control speed shown as "mph" or "kn" in the Autopilot information bar. Ú Note: Cruise set speed sets the target speed for your vessel. Your vessel may not be able to achieve the set target. The Cruise set speed (not your current speed) is displayed in the Autopilot information bar. Speed adjustments You can make speed adjustments on the Heading lock and Navigation control dialogs by selecting the Spd up (+) and Spd down (-) buttons, or by selecting the Set Spd or Set prop option and entering your desired speed or propeller rate. Autopilot | HDS Gen3 Operator Manual 103