Lowrance HDS-9 LIVE HDS Live Operator Manual - Page 130
The cursor assist function, Go to cursor, Adjusting the radar image, Radar use modes
View all Lowrance HDS-9 LIVE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
When you position the cursor on the radar panel, the cursor position window is activated and the cursor menu options are displayed. To remove the cursor and cursor elements from the panel, select Clear cursor or press the X key. The cursor assist function The cursor assist function allows for fine tuning and precision placement of the cursor without covering details with your finger. Activate the cursor on the panel, then press and hold your finger on the screen to switch the cursor symbol to a selection circle, appearing above your finger. Without removing your finger from the screen, drag the selection circle to the desired position. When you remove your finger from the screen the cursor reverts to normal cursor operation. Go to cursor You can navigate to a selected position on the image by positioning the cursor on the panel, and then using the go to cursor menu option. Adjusting the radar image You may be able to improve the radar image by adjusting the radar sensitivity, and by filtering out the random echoes from sea and weather conditions. You can adjust the image settings from the radar menu. Radar use modes Radar modes are available with default optimal control settings for different environments. The following modes are available: • Custom - In this mode all radar controls can be adjusted and will be retained after a mode change or radar power cycle. Radar defaults are set for general purpose use. • Harbor - In this mode the radar settings are optimized for areas such as busy waterways and large man-made structures where good target discrimination and rapid image updates are needed. 130 Radar| HDS Live Operator Manual