Lowrance Link-8 DSC VHF Link-8 VHF Installation Manual EN - Page 6
Installation preparation, 1.1 Checklist, 1.2 Tools needed for installation
View all Lowrance Link-8 DSC VHF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
1 Installation preparation 1.1 Checklist Check that you have all the following items before starting the installation. Contact your dealer if an item is missing: • Link-8 base station, with microphone • Handset mic wall hanger, with: attached -- 2 self-tapping screws • Dust cover • GPS connector cable • Speaker connector cable • Power supply cable (with 7 A fuseholder incorporated) • Spare 7 A fuse -- 2 flat screws -- 2 plain washers -- 2 spring washers -- 2 nuts • 2 M5 x 32 screws with 2 plain washers and 2 nuts (for a recessed installation) • Mounting bracket, with: • Operation Manual -- 4 self-tapping screws • Installation Manual -- 4 flat screws -- 4 plain washers -- 4 spring washers -- 4 nuts -- 2 mounting knobs • Warranty Card • DSC Warning Label • Template for flush mounting option • Declaration of Conformity document (where applicable) Note: A VHF antenna is not provided by Lowrance. Consult your Lowrance dealer for advice if necessary. 1.2 Tools needed for installation You will need the following tools: • Power drill (or hand drill) and drill bits • Philips screwdriver • Spanner • Jig saw (for a recessed installation). 6 Lowrance - Link-8 Installation Instructions