MSI 915GM-FR User Manual - Page 18

MS-7033 M-ATX Mainboard - bios

Get MSI 915GM-FR - Motherboard - Micro ATX PDF manuals and user guides
UPC - 816909006445
View all MSI 915GM-FR manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

M S-7033 M -ATX M ainboard 9. Engage the load while pressing down lightly onto the load plate, and then secure the lever with the hook under retention tab. 10. Align the holes on the mainboard with the heatsink first. Pull down the fan/heatsink until its four clips get wedged in the holes of the mainboard. 11. Press the four hooks down to fasten the fan. Then rotate the locking switch (refer to the correct direction marked on it) to lock the hooks again. 12. Turn over the mainboard to confirm that the clip-ends are corrected inserted. locking switch MSI Reminds You... 1. Confirm if your CPU heatsink/cooler is firmly installed before turning on your system. 2. Check the information in PC Health Status of H/W M onitor in BIOS (refer to p.3-20 for details) for the CPU temperature. 3. Make sure that the CPU socket pins are not turned up or pressed down. 2-6

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
2-6
MS-7033 M-ATX Mainboard
10. Align the holes on the mainboard
with the heatsink first. Pull down
the fan/heatsink until its four clips
get wedged in the holes of the
mainboard.
12. Turn over the mainboard to con-
firm that the clip-ends are cor-
rected inserted.
locking
switch
11. Press the four hooks down to fas-
ten the fan. Then rotate the lock-
ing switch (refer to the correct di-
rection marked on it) to lock the
hooks again.
9. Engage the load while pressing
down lightly onto the load plate, and
then secure the lever with the hook
under retention tab.
MSI Reminds You...
1. Confirm if your CPU heatsink/cooler is firmly installed before
turning on your system.
2. Check the information in
PC Health Status
of
H/W Monitor
in
BIOS (refer to p.3-20 for details) for the CPU temperature.
3. Make sure that the CPU socket pins are not turned up or pressed
down.