MSI 915GM-FR User Manual - Page 53
IDE Primary Master/Slave Ultra DMA, SATA Devices Configuration, On-Chip Serial ATA, Standard COMS, - driver windows 7
UPC - 816909006445
View all MSI 915GM-FR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
M S-7033 M -ATX M ainboard IDE Primary Master/Slave Ultra DMA Ultra DMA 33/66/100/133 implementation is possible only if your IDE hard drive supports it and the operating environment includes a DMA driver (Windows ME, XP or a third-party IDE bus master driver). If your hard drive and your system software both support Ultra DMA/33, Ultra DMA/66, Ultra DMA/100 and Ultra DMA/133, select [Auto] to enable BIOS support. Setting options: [Auto], [Disabled]. SATA Devices Configuration Press and the following sub-menu appears: On-Chip Serial ATA This setting is used to specify the SATA controller. The settings are: [Disabled] Disable the SATA controller. [Auto] PATA and SATA will be arranged by BIOS, and you will be able to see the IDE Device status listed in Standard COMS Features. [Combined] PATA and SATA will be combined. Max. of 2 IDE drives in each channel are available. [Enhanced] PATA and SATA will both be enabled. Max. of 6 IDE drives are s up port ed . [SATA only] Only SATA is operating in legacy mode. PATA IDE Mode This item is available for you to select the parallel ATA channel. Setting options: [Primary], [Secondary]. SATA Port This allows you to set the boot sequence of serial ATA port. 3-18