MSI 945P NEO5-F User Guide - Page 22
MS-7236 Mainboard - bios
![]() |
UPC - 816909038156
View all MSI 945P NEO5-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
MS-7236 Mainboard 9. Press down the load lever lightly onto the load plate, and then secure the lever with the hook under retention tab. 10. Align the holes on the mainboard with the heatsink. Push down the cooler until its four clips get wedged into the holes of the mainboard. 11. Press the four hooks down to fasten the cooler. Then rotate the locking switch (refer to the correct direction marked on it) to lock the h ook s . 12. Turn over the mainboard to confirm that the clip-ends are correctly inserted. locking switch Important 1. Check the information in H/W Monitor in BIOS (Chapter 3) for the CPU temperature. 2. Whenever CPU is not installed, always protect your CPU socket pin with the plastic cap covered (shown in step 1) to avoid damaging. 2-6
![](/manual_guide/products/msi-945p-neo5f-user-guide-856730c/22.png)