MSI 945P NEO5-F User Guide - Page 35
Chassis Intrusion Switch Connector: JCI1, SPDIF-Out Connector: JSPD1, Optional, for HDMI graphics
![]() |
UPC - 816909038156
View all MSI 945P NEO5-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Hardware Setup Chassis Intrusion Switch Connector: JCI1 This connector is connected to a 2-pin chassis switch. If the chassis is opened, the switch will be short. The system will record this status and show a warning message on the screen. To clear the warning, you must enter the BIOS utility and clear the record. CINTRU 1 GNF 2 JCI1 SPDIF-Out Connector: JSPD1 (Optional, for HDMI graphics card only) This connector is used to connect SPDIF (Sony & Philips Digital Interconnect Format) interface for digital audio transmission to the HDMI graphics card. SPDF0 GND JSPD1 2-19
![](/manual_guide/products/msi-945p-neo5f-user-guide-856730c/35.png)
2-19
Hardware Setup
Chassis Intrusion Switch Connector: JCI1
This connector is connected to a 2-pin chassis switch. If the chassis is opened, the
switch will be short. The system will record this status and show a warning mes-
sage on the screen. To clear the warning, you must enter the BIOS utility and clear the
record.
SPDIF-Out Connector: JSPD1
(Optional, for HDMI graphics card only)
This connector is used to connect SPDIF (Sony & Philips Digital Interconnect Format)
interface for digital audio transmission to the HDMI graphics card.
JCI1
1
2
CINTRU
GNF
JSPD1
SPDF0
GND