MSI 945P NEO5-F User Guide - Page 55
PnP/PCI Configurations
![]() |
UPC - 816909038156
View all MSI 945P NEO5-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 55 highlights
MS-7236 Mainboard PnP/PCI Configurations This section describes configuring the PCI bus system and PnP (Plug & Play) feature. PCI, or Peripheral Component Interconnect, is a system which allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings. Primary Graphic's Adapter This setting specifies which graphic card is your primary graphics adapter. Setting options are: [PEG] The system initializes the installed PEG card first. If an PEG card is not available, it will initialize the PCI VGA card. [PCI] The system initializes the installed PCI VGA card first. If a PCI VGA card is not available, it will initialize the PEG card. PCI Latency Timer This item controls how long each PCI device can hold the bus before another takes over. W hen set to higher values, every PCI device can conduct transactions for a longer time and thus improve the effective PCI bandwidth. For better PCI performance, you should set the item to higher values. Setting options: [32], [64], [96], [128], [160], [192], [224], [248]. 3-18
![](/manual_guide/products/msi-945p-neo5f-user-guide-856730c/55.png)