MSI B85M User Guide - Page 72
Shows current CPU VCCIN voltage. Read-only., CPU Memory Changed Detect [Enabled]
View all MSI B85M manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
▶ DRAM Training Configuration Press to enter the sub-menu. Enables or disables the various training ways of DRAM. The system may become unstable or unbootable after changing these items in this sub-menu. If it occurs, please clear the CMOS data and restore the default settings. (Refer to the Clear CMOS jumper/ button section to clear the CMOS data, and enter the BIOS to load the default settings.) ▶ Memory Fast Boot [Auto] Enables or disables the initiation and training for memory every booting. [Auto] This setting will be configured automatically by BIOS. [Enabled] Memory will completely imitate the archive of first initiation and first training. After that, the memory will not be initialed and trained when booting to accelerate the system booting time. [Disabled] The memory will be initialed and trained every booting. ▶ VCCIN Voltage [Auto] Sets the CPU input voltage. The CPU input voltage is the CPU power source that is shared with components of the CPU. ▶ Current VCCIN Voltage Shows current CPU VCCIN voltage. Read-only. ▶ CPU Core Voltage Mode Selects the control modes for CPU Core voltage. [Auto] This setting will be configured automatically by BIOS. [Adaptive Mode] Sets adaptive voltage automatically for optimizing the system performance. [Override Mode] Allows you to set this voltages manually. ▶ CPU Core Voltage [Auto] Sets CPU core voltage. If set to "Auto", BIOS will set the voltages automatically or you can set it manually. ▶ Current CPU Core Voltage Shows the current CPU core voltage. Read-only. ▶ DRAM Voltage [Auto] Sets the memory voltage. If set to "Auto", BIOS will set memory voltage automatically or you can set it manually. ▶ Current DRAM Voltage Shows current memory voltage. Read only. ▶ CPU Memory Changed Detect [Enabled] Enables or disables the system to issue a warning message during boot when the CPU or memory has been replaced. [Enabled] The system will issue a warning message during boot and than needs to load the default settings for new devices. [Disabled] Disables this function and keeps the current BIOS settings. Chapter 3 BIOS Setup 3-18