MSI K8T MASTER2-FAR User Guide - Page 22
For CPU1 - motherboard
UPC - 816909004427
View all MSI K8T MASTER2-FAR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
MS-9617 ATX Workstation Board u For CPU1 1. Locate the CPU and its retention modules on the motherboard. retention modules 2. Position the heatsink/cooler onto the retention modules. Connect the wires to the fan power connector (CFAN1), then press down the fan until its four clips get wedged in the holes of the retention modules. fan power 3. Hook one end of the clip into the hole of the retention module, then push down the handle to hook the other end to the retention module. 4. Repeat step 3 on the other clip. handle 2-6
2-6
MS-9617 ATX Workstation Board
2.
Position the heatsink/cooler onto the
retention modules. Connect the wires
to the fan power connector (CFAN1),
then press down the fan until its four
clips get wedged in the holes of the
retention modules.
1.
Locate the CPU and its retention mod-
ules on the motherboard.
3.
Hook one end of the clip into the hole
of the retention module, then push
down the handle to hook the other
end to the retention module.
4.
Repeat step 3 on the other clip.
retention modules
fan power
handle
u
For CPU1