MSI K9AG NEO2-DIGITAL User Guide - Page 48
BIOS Setup, On-Chip ATA Devices, PCI IDE BusMaster, On-Chip SATA Controller, RAID Mode
UPC - 816909039818
View all MSI K9AG NEO2-DIGITAL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
BIOS Setup On-Chip ATA Devices Press to enter the sub-menu and the following screen appears: PCI IDE BusMaster This item allows you to enable/ disable BIOS to used PCI busmastering for reading/ writing to IDE drives. On-Chip SATA Controller This setting is used to specify the operating mode for SATA devices. RAID Mode This item is available for you to enable/disable the onboard IDE RAID function. I/O Devices Configuration Press to enter the sub-menu and the following screen appears: COM Port 1 This item specifies the base I/O port addresses of the onboard Serial Port 1 (COM 1). Selecting [Auto] allows AMIBIOS to automatically determine the correct base I/O port address. 3-13
3-13
BIOS Setup
On-Chip ATA Devices
Press <Enter> to enter the sub-menu and the following screen appears:
PCI IDE BusMaster
This item allows you to enable/ disable BIOS to used PCI busmastering for
reading/ writing to IDE drives.
On-Chip SATA Controller
This setting is used to specify the operating mode for SATA devices.
RAID Mode
This item is available for you to enable/disable the onboard IDE RAID function.
I/O Devices Configuration
Press <Enter> to enter the sub-menu and the following screen appears:
COM Port 1
This item specifies the base I/O port addresses of the onboard Serial Port 1
(COM 1). Selecting [Auto] allows AMIBIOS to automatically determine the correct
base I/O port address.