MSI K9N SLI-F User Guide - Page 112
MS-7250 Mainboard, Create Array, Mirroring
UPC - 816909043235
View all MSI K9N SLI-F manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 112 highlights
MS-7250 Mainboard 1 From the NVRAIDMAN window, right click on any available free disk and select Create Array as show in Figure below. 2 The Create Array W izard opens. Follow the W izard to create a Mirror array. 3 At the Create Array W izard Welcome screen, click Next. 4 At the RAID Array Selection page, make sure that RAID Mode is set to "Mirroring" and Stripe Size is set to its default value of 64K, then click Next. 5 At the Free Disk Selection page, select the two drives that you want to Mirror and click Next. 6 Click Next again and the following screen shot will appear: 7 Check "Intialize Array" and then click Next. The Initialization Warning dialog appears. B-20
MS-7250 Mainboard
B-20
1
From the NVRAIDMAN window, right click on any available free disk and select
Create Array
as show in Figure below.
2
The Create Array Wizard opens. Follow the Wizard to create a Mirror array.
3
At the Create Array Wizard Welcome screen, click
Next
.
4
At the RAID Array Selection page, make sure that RAID Mode is set to
“
Mirroring
”
and Stripe Size is set to its default value of 64K, then click
Next
.
5
At the Free Disk Selection page, select the two drives that you want to Mirror and
click
Next
.
6
Click
Next
again and the following screen shot will appear:
7
Check
“
Intialize Array
”
and then click
Next
. The Initialization Warning dialog appears.