MSI KT880 User Guide - Page 44
Full Screen LOGO Display, Boot Sequence, 1st/2nd/3rd Boot Device, Boot From Other Devices, BIOS Setup
UPC - 816909006063
View all MSI KT880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
BIOS Setup Full Screen LOGO Display This item enables you to show the company logo on the bootup screen. Settings are: [Enabled] Shows a still image (logo) on the full screen at boot. [Disabled] Shows the POST messages at boot. Boot Sequence Press and the following sub-menu appears. 1st/2nd/3rd Boot Device These items allow you to set the sequence of boot devices where AMIBIOS attempts to load the operating system. MSI Reminds You... Available settings for "1st/2nd/3rd Boot Device" vary depending on the bootable devices you have installed. For example, if you did not install a floppy drive, the setting "Floppy" does not show up. Boot From Other Devices Setting the option to [Yes] allows the system to try to boot from other devices if the system fails to boot from the 1st/2nd/3rd boot device. Settings are: [Yes], [No]. 3-9