MSI MEG X399 CREATION User Manual - Page 47
CPU_FAN1, PUMP_FAN1, SYS_FAN1~5, EXT_FAN1~3: Fan Connectors, T_SEN1~3: Thermal Sensor Connectors
![]() |
View all MSI MEG X399 CREATION manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
CPU_FAN1, PUMP_FAN1, SYS_FAN1~5, EXT_FAN1~3: Fan Connectors Fan connectors can be classified as PWM (Pulse Width Modulation) Mode or DC Mode. PWM Mode fan connectors provide constant 12V output and adjust fan speed with speed control signal. DC Mode fan connectors control fan speed by changing voltage. This motherboard can automatically detect PWM and DC mode. However, you can follow the instruction below to adjust the fan connector to PWM or DC Mode manually. 1 1 CPU_FAN1 (Default : Auto-detection Mode) PUMP_FAN1 (Default : PWM Mode) Default DC Mode fan connectors 1 1 Important SYS_FAN1/ SYS_FAN2/ SYS_ FAN3/ SYS_FAN4/ EXT_FAN1/ EXT_FAN2 SYS_FAN5/ EXT_FAN3 y You can switch between PWM mode and DC mode and adjust fan speed in BIOS > HARDWARE MONITOR. y Make sure fans are working properly after switching the PWM/ DC mode. Pin definition of fan connectors PWM Mode pin definition 1 Ground 2 +12V 3 Sense 4 Speed Control Signal DC Mode pin definition 1 Ground 2 Voltage Control 3 Sense 4 NC T_SEN1~3: Thermal Sensor Connectors These connectors allow you to connect the thermistor cable and use it to monitor the temperature of the detection point. Sense GND Thermistor cable Overview of Components 47
![](/manual_guide/products/msi-meg-x399-creation-user-manual-9eba021/47.png)