MSI MEG Z590 ACE User Manual - Page 48
JCI1: Chassis Intrusion Connector, Resetting the chassis intrusion warning
![]() |
View all MSI MEG Z590 ACE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
JCI1: Chassis Intrusion Connector This connector allows you to connect the chassis intrusion switch cable. Normal (default) Trigger the chassis intrusion event Using chassis intrusion detector 1. Connect the JCI1 connector to the chassis intrusion switch/ sensor on the chassis. 2. Close the chassis cover. 3. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration. 4. Set Chassis Intrusion to Enabled. 5. Press F10 to save and exit and then press the Enter key to select Yes. 6. Once the chassis cover is opened again, a warning message will be displayed on screen when the computer is turned on. Resetting the chassis intrusion warning 1. Go to BIOS > SETTINGS > Security > Chassis Intrusion Configuration. 2. Set Chassis Intrusion to Reset. 3. Press F10 to save and exit and then press the Enter key to select Yes. 48 Overview of Components
![](/manual_guide/products/msi-meg-z590-ace-user-manual-bd2ac22/48.png)