MSI X99S User Guide - Page 76
Security, Sets TPM Trusted Platform Module function.
View all MSI X99S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 76 highlights
▶▶Boot Mode Select [LEGACY+UEFI] Sets the system boot mode from legacy or UEFI architecture depending on OS installation requirement. This item will become unselectable and will be configured automatically by BIOS when "Windows 8/ 8.1 Feature" is enabled. [UEFI] Enables UEFI BIOS boot mode support only. [LEGACY+UEFI] Enables both Legacy BIOS boot mode and UEFI BIOS boot mode. ▶▶FIXED BOOT ORDER Priorities Sets device priority for system boot. ▶▶Boot Option #1~N These items are used to prioritize the installed boot devices. Security ▶▶Administrator Password Sets administrator password for system security. Enters the administrator password if set; user has full rights to change the BIOS items. ▶▶User Password Sets User Password for system security. Enters the user password if set; but user might have limited rights to change the BIOS items. Important When selecting the Administrator / User Password items, a password box will appear on the screen. Type the password then press . The password typed now will replace any previous set password from CMOS memory. You will be prompted to confirm the password. You may also press to abort the selection. To clear a set password, press when you are prompted to enter a new password. A message will confirm the password is being disabled. Once the password is disabled, you can enter the setup and OS without authorization. ▶▶Trusted Computing Sets TPM (Trusted Platform Module) function. ▶▶TPM SUPPORT [Disabled] Enables or disables the TPM function to build the endorsement key for accessing the system. ▶▶Chassis Intrusion Configuration Press to enter the sub-menu. ▶▶Chassis Intrusion [Disabled] This function will be available if the chassis equips a chassis intrusion switch. Once the chassis is opened, the system will record and issue a warning message. To clear the warning message, set the item to [Reset], then it will return to [Enabled] later. [Options: Disabled, Enabled, Reset] Chapter 3 BIOS Setup 3-14