Macrom M-DVD7701 User Manual (English) - Page 16

There are three ways to tune in a station upwards automatically as below: press >> button on the remote control; press >>I button on the panel; touch on > button on the touch screen. 2.1 Manual Tuning There are three ways to tune in a station downwards manually as below: press and hold button on the remote control; press and hold >>I button on the panel; touch and hold on > button on the touch screen. 3. Recalling a preset station A total of 30 preset stations (18-FM, 12-MW) are available in memory. Press I>I button on the remote control OR press AMS button to recall a preset station. The display shows the preset number and frequency of the stored station; touch one of these to select a corresponding station. Note: Press any one of the station preset buttons on the remote control also to select the preset stations. It is a function for storing up to 6 stations. Follow the two steps: Select the desired band; hold down AMS button, the stations with good reception are stored automatically. 4.2 Manual store To turn in a station to be stored in the preset memory, press and hold any one of the preset buttons (1-6) to store on. *If a new station will be stored in a preset memory which already has a station, the current station will be cleared and replaced by the new station. 5.DX/LOC Selector In radio mode, press LOC button on the remote control to select strong or weak station reception. 5.1 LOC When LOC displays on the touch screen, only strong signal stations will be tuned. 5.2 DX When there is no LOC displays on the touch screen, both strong and weak stations can be received. Note: The initial mode is DX mode. 6. MO/ST Selector In FM of radio mode, you can press ST button on the remote control to select Mono mode or Stereo mode. 4. Store stations 4.1 Auto store 7. EXACT STATION SELECTION 7.1 Press number buttons (1-6) on the remote control to GB-15