Macrom M-DVD7701 User Manual (English) - Page 19

performs dial(receiving) a call or hang up a call function *The incoming call will interrupt the sound output through other source, and switch to the hands-free phone screen automatically when it is received. After the call is ended, the unit will be back to the previous mode. * The hands-free phone sounds output through the built-in speakers. When calling, press Audio Transfer button on the screen to switch the mode to receive a call by using mobile phone, and press it again to return to hands-free mode. USER INTERFACE OPERATION 1. MAIN PAGE After selecting the bluetooth mode, MAIN PAGE will display as FIG.1. The user can dial up in this mode, input the number required by pressing number button on the remote control or on the screen then press button on remote control or on the screen to dial up. The telephone number you dialed is appeared on the DISPLAY COLUMN. A maximum of 15 numbers can be stored in each call history. A maximum of 5 numbers will be displayed in each page. Tap on ▲▼ button to turn to previous/next page.(FIG.3)You can place a call by selecting a number from a list of each item. Receiving a Call when a call is coming, the received call sound rings ,and the coming call number is shown in the display. Press button on the screen to starts the call. End a Call or reject a call Press button on the screen or on the remote control to end or reject the call. 3. SETUP PAGE Tap on SETUP PAGE button on the screen shown in FIG.1, the screen will display as following FIG.4. 2. PHONE BOOK Tap on PHONE BOOK button on the screen shown above, the screen will display as following FIG.2. There are three items: DIALED CALLS, RECEIVED CALLS and MISSED CALLS. 3.1 AUTO-ANSWER ON: Tap on this button then the coming call will be answer automatically. OFF: Tap on this button then the coming call will not be answer automatically. 3.2 CONNECT AUTO: Tap on this button then the unit and the device GB-18