Macrom M-DVD7701 User Manual (English) - Page 28

SD card witch stored navigating map. *Long press SRC/NAV button or Touching NAV item on source selection screen also activate the function Calibration To avoid the touching effect function invalid, please calibrate the touchable screen before perform navigating operation For more information regarding the NAV.Operation, please refer to the user manual of navigating electronic map. Please confirm your place is not under the bridge, on the tunnel or near the building which can infect the signal received. For safety, please avoid operate the system while driving. GPS system is operated in background at any modes. INSTALLATION Press TOUCH SCREEN button on the touchable screen Notes and the screen display as following: Before finally installing the unit, connect the wiring temporarily, making sure it is all connected up properly, and the unit and the system work properly. Use only the parts included with unit to ensure proper installation. The use of unauthorized parts can cause malfunctions. Consult with your nearest dealer if installation requires the drilling of holes or other modifications of the vehicle. Please use something with needle end touching on the + button to finish the calibration. Install the unit where it does not get in the driver's way and cannot injure the passenger if there is a sudden stop. The semiconductor laser will be damaged if it overheats, NO TE Touch the selection displayed on screen to perform the corresponding operation so don't install the unit anywhere hot--for instance, near a heater outlet. If installation angle exceeds 30° from horizontal, the GB-27