Magellan Maestro 4700 Manual - English - Page 12
Attaching the Magellan Maestro receiver to the Car Cradle
UPC - 763357123135
View all Magellan Maestro 4700 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Attaching the Magellan Maestro receiver to the Car Cradle Slide the Magellan Maestro receiver on the car cradle so that the slot on the Magellan Maestro receiver aligns with the tab on the car cradle. Slide the Magellan Maestro receiver all the way down until it rests on the 'feet'. You should notice a click when the receiver is fully mounted in the cradle. Adjusting the Mount for Optimum Viewing Loosen the adjustment locking knobs and position the Magellan Maestro receiver for optimum viewing. Once set, tighten the locking knobs. (Never attempt to adjust the mount while driving.) Connecting Power Plug the end of the vehicle power adapter into a 12VDC vehicle power receptacle. Connect the other end of the cable to the Magellan Maestro receiver's USB connector as shown. Note: Some vehicles apply power to the vehicle power receptacle only when the ignition is on. Routing the Cable The 12VDC power cable and the optional Traffic Link cable are connected in the same manner. If you have the standard 12VDC power cable and have purchased the optional Traffic Link cable, replace the standard cable with the new cable. Route the cable behind the Magellan Maestro receiver as shown. Lock the cable into the cable retainer. Checking Connection and Final Adjustments If the power indicator light on the vehicle power adaptor is on, power is being supplied to the Magellan Maestro receiver. If it is not on, check the cable connection to the vehicle power receptacle. If the light is still not on, turn the vehicle's ignition on. Slide the power switch (located at the top right side of the Magellan Maestro receiver) to the right. Sit in a normal driving position and make any final adjustments to the car cradle for optimum viewing. Make sure the adjusting knobs on the car cradle are firmly in place. Slide the power switch again to the left to turn the Magellan Maestro receiver off and turn the ignition switch of the vehicle to off. The Magellan Maestro receiver is connected and ready for use. 4