Magellan eXplorist 210 Manual - English - Page 74
Uploading to the Magellan eXplorist
UPC - 763357112702
View all Magellan eXplorist 210 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Magellan Geocache Manager 71 Uploading to the Magellan eXplorist 1. Turn the eXplorist off and connect it to the USB port on your computer. 2. Turn the eXplorist on. If connected correctly, it will begin in the USB File Transfer mode or the Communications menu is displayed. (If the Communications menu is shown, select USB File Transfer and press ENTER.) If neither of these screens is displayed there maybe a bad connection. Turn the eXplorist off and check the connections and try again. The eXplorist must be in the USB File Transfer mode for geocache points to be uploaded. 3. Select the files to be uploaded. (If no files are selected, it is assumed that you want to upload the entire list.) Tips on selecting files: To select a single geocache point, click on the name. To select multiple, consecutive geocache points, hold the Shift key down while clicking on the geocache point names. To select multiple, non-consecutive geocache points, hold the Ctrl key down while clicking on the geocache point names. 4. Click the Upload Icon on the Magellan Geocache Manager. 5. Make sure that the correct radio button is selected (All Geocaches or Selection). 6. Click on the OK button. 7. Select the location for the file to be saved. 8. If the transfer is successful, an alert will be displayed. 9. You are now able to access and create a GOTO to any of the geocache points following the instructions for creating a GOTO. (Geocache points can also be used in multi-leg routes but the most common usage will be in a GOTO.)