Magnavox 27MS4504 User manual, English (US) - Page 9

5 USING THE S-VIDEO INPUT JACKS The S(uper)-Video connection on the rear of the TV can provide you with better picture detail and clarity for the playback of accessory sources such as DBS (digital broadcast satellite), DVD (digital video discs), video games, and S-VHS VCR (video cassette recorder) tapes than the normal antenna picture connections. Back of TV 2 Monitor out AV1 in VIDEO Y L/Mono AV2 in 1 NOTE: The accessory device must have an S-VIDEO OUT(put) jack in order for you to complete the connection on this page. AUDIO Pb R Pr COMPONENT VIDEO INPUT S-VIDEO 1 Connect one end of the S- Audio Cable VIDEO CABLE to the S-VIDEO (Red and White) jack on the back of the TV. Then S-Video Cable connect one end the AUDIO (red and white) CABLES to the AV2 in AUDIO L and R (left and right) jacks on the rear of the TV. 2 Connect other end of the S-VIDEO CABLE to the 2 S-VIDEO OUT jack on the back of L R AUDIO OUT VIDEO OUT S-VIDEO ANT/CABLE OUT OUT Back of VCR 1 the VCR. Then connect the other ends of the AUDIO (red and white) CABLES to the AUDIO (left and right) OUT jacks on the rear of the VCR. 3 Turn the VCR and the TV ON. 4 Press the CH + or CH- buttons to set the TV to its SVHS2 channel. (Go to your lowest chan- 3 VCR (Equipped with S-Video Jacks) 5 1 2 3 POWER 4 5 6 CH 7 8 9 CH 4 nel, for example channel 1, then change channels down to find the A/CH 0 CC VOL correct source channel.) STATUS VOL 5 Now your ready to place a prerecorded video tape in the VCR and press the PLAY ᮣ button. EXIT MENU SLEEP MUTE HELPFUL HINT The S-VIDEO and VIDEO AV2 in(puts) are in parallel. The S-VIDEO input is dominant when in use. If separate video signals are connected to the S-VIDEO and VIDEO AV2 in(puts), the signal from the VIDEO AV2 in(puts) will not be usable. SURF SMART PICTURE SOUND MAGNAVOX