Magnavox 32MF338B User Manual - Page 19

INTRODUCTION PREPARATION INITIAL SETTING WATCHING TV OPTIONAL SETTING 5 Screen Information You can display the currently selected channel or other information such as the audio mode on the TV screen. TV In the analog mode, the current channel number and the audio mode are displayed. Press [INFO]. 6 SAP / STEREO 480i SSDD 4:3 TV-PG DLSV CCCC • The current channel number, audio mode, type of resolutions for video signal, TV aspect ratio, CC and TV program rating are displayed on the top-right corner of the TV screen. To clear the display, press [INFO] again. You can also press [BACK ]. DTV In the digital mode, the detailed broadcasting information for the current channel such as program title, program guides are displayed. Press [INFO] to display the details of the currently selected program. Broadcasting Information • The following information is displayed. 1 program title 2 broadcast station 3 program guide (The program guide added to broadcasting information is displayed. Maximum display of 4 lines.) 4 channel number 5 audio language (Refer to "Switching Audio Mode" on page 18.) 6 effective scanning lines and scan mode 7 program format 8 program aspect ratio 9 program rating 10 CC (not available if CC is set to "Off") 1 2 4 A Day of Memories KABC 40-1 5 3 A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the English 1/2 industry's advertising revenues. Department stores and supermarket 480i SD 44::33 6, 7, 8 were selling a stock on the same day it was purchased. When the new Rating CCCC TV: TV-14 Grad B: B4 Grad C: C2 NG Toggle A: H1 10 9 Note: • When the program guide consists of more than 4 lines, use [Cursor K/ L] to scroll. • "No description provided." is displayed when the program guide is not provided. • While the program guide is displayed, the closed caption function is interrupted. • In external input mode, the following screen is displayed; e.g.) When an external device is connected to VIDEO1 input jack. Video1 448800ii SD TV-PG DLSV CCCC • The information display will automatically disappear in 1 minute. • "This program exceeds your rating limit. To unlock the program, enter your PIN." is displayed when you access to the programs which exceed the rating level you set. To watch the programs, enter your Pin number by using [the Number buttons]. The following operations set the rating level again. - Turn off the unit. - Follow the steps 1-4 in "Parental Control" on page 29 and enter your Pin number. TROUBLESHOOTING INFORMATION 19 EN