Magnavox MME100 User manual, English (US) - Page 14

English CD Operations 5 To interrupt playback press 2;. Press 2; again to resume play. ➜ The display freezes and the current track number flashes when playback is interrupted. 6 To stop disc playback, press 9. Note: CD play will also stop when; - the CD door is opened. - the disc has reached the end. - you select another source: TAPE,TUNER. - you select to standby. - you press the tape deck PLAY 2 key. IMPORTANT: The lens of the CD player should never be touched. Selecting a different track ● Press ¡1 or 2™ once or repeatedly until the desired track number appears in the display. ● If you have selected a track number shortly after loading a disc or in the PAUSE position, you will need to press 2; to start playback. Playing a disc This CD player plays Audio Discs including CDRecordables and CD-Rewritables. ¶ CD-ROM, CD-I, CDV, VCD, DVD or computer CDs, however, are not possible. 1 Select CD source. 2 Press OPEN / CLOSE on the top of the system to open the CD compartment. ➜ OPEN is displayed when you open the CD compartment. 3 Insert a disc with the printed side facing up and press down on OPEN / CLOSE to close the CD door. ➜ READ is displayed as the CD player scans the contents of a disc, and then the total number of tracks are shown. 4 Press 2; to start playback. ➜ Current track number is displayed then elapsed playing time of the track are displayed during disc playback. Finding a passage within a track 1 Press and hold down on ¡1 or 2™ (on the remote control à or á ). ➜ The disc is played at high speed and low volume. 2 When you recognize the passage you want, release ¡1 or 2™ (on the remote control à or á). ➜ Normal playback continues. Note: - During a disc program or if SHUFFLE/ REPEAT active, searching is only possible within the same track. 14