Magnavox MME100 User manual, English (US) - Page 20

Troubleshooting, Specifications

Page 20 highlights

English AMPLIFIER Output power ... 2 x 5 W RMS / 2 x 5 W FTC(1 10 W total power Signal-to-noise ratio 62 dBA (IEC) Frequency response ......... 60 - 16000 Hz, ± 3 dB Input sensitivity AUX 0.5 V (max. 2 V) Impedance loudspeakers 3 Ω Impedance headphones 32 Ω -1000 Ω (1) (3 Ω, 200 Hz- 12.5kHz, 10% THD) CD PLAYER Number of programmable tracks 30 Frequency range 63 - 14 KHz Signal-to-noise ratio 62 dBA Channel separation 30 dB (1 kHz) Total harmonic distortion 1.5 % TUNER FM wave range 87.5 - 108 MHz AM wave range 530 - 1700 kHz Sensitivity at 75 Ω - mono, 26 dB signal-to-noise ratio ...... ≤ 22 dBu - stereo, 46 dB signal-to-noise ratio ........ 61.4 µV Specifications TAPE DECK Frequency response Normal tape (type I) ...... 80 - 10000 Hz (8 dB) Signal-to-noise ratio Normal tape (type I 48 dBA Wow and flutter 0.35% DIN SPEAKERS 2-way Bass reflex system Dimensions (w x h x d)148 x 221.5 x 175 (mm 5.83 x 8.72 x 6.89 (inch) GENERAL INFORMATION AC Power 120 V / 60 Hz Dimensions (w x h x d) 154 x 225.5 x 215 (mm 6.06 x 8.88 x 8.46 (inch) Weight (with/without speakers approx. 6.3 / 3.3 kg approx. 13.86 / 7.26 pound Standby power consumption 3 W Specifications and external appearance are subject to change without notice. Troubleshooting WARNING Under no circumstances should you try to repair the system yourself, as this will invalidate the warranty. Do not open the system as there is a risk of electric shock. If a fault occurs, first check the points listed below before taking the system for repair. If you are unable to remedy a problem by following these hints, consult your dealer or service center. Problem Solution CD OPERATION "nO dISc" is displayed. - Insert a disc. - Check if the disc is inserted upside down. - Wait until the moisture condensation at the lens has cleared. - Replace or clean the disc, see "Maintenance". - Use a finalized CD-RW or CD-R. 20

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23

20
English
WARNING
Under no circumstances should you try to repair the system yourself, as this will invalidate the
warranty.
Do not open the system as there is a risk of electric shock.
If a fault occurs, first check the points listed below before taking the system for repair. If you
are unable to remedy a problem by following these hints, consult your dealer or service center.
Problem
Solution
CD OPERATION
n
O
d
IS
c
is displayed.
Insert a disc.
Check if the disc is inserted upside down.
Wait until the moisture condensation at the lens
has cleared.
Replace or clean the disc, see “Maintenance”.
Use a finalized CD-RW or CD-R.
Troubleshooting
Specifications
AMPLIFIER
Output power ... 2 x 5 W RMS / 2 x 5 W FTC
(1)
.................................................................
10 W total power
Signal-to-noise ratio
..........................
62 dBA (IEC)
Frequency response
.........
60 – 16000 Hz, ± 3 dB
Input sensitivity AUX
.......................
0.5 V (max. 2 V)
Impedance loudspeakers
.........................................
3
Impedance headphones
....................
32
-1000
(1) (3
, 200 Hz- 12.5kHz, 10% THD)
CD PLAYER
Number of programmable tracks
.........................
30
Frequency range
........................................
63 – 14 KHz
Signal-to-noise ratio
............................................
62 dBA
Channel separation
..........................
30 dB (1 kHz)
Total harmonic distortion
...............................
< 1.5 %
TUNER
FM wave range
...................................
87.5 – 108 MHz
AM wave range
..................................
530 – 1700 kHz
Sensitivity at 75
– mono, 26 dB signal-to-noise ratio
......
22 dBu
– stereo, 46 dB signal-to-noise ratio
........
61.4 μV
TAPE DECK
Frequency response
Normal tape (type I)
......
80 – 10000 Hz (8 dB)
Signal-to-noise ratio
Normal tape (type I)
......................................
48 dBA
Wow and flutter
.......................................
0.35% DIN
SPEAKERS
2-way Bass reflex system
Dimensions (w x h x d)148 x 221.5 x 175 (mm)
..................................................
5.83 x 8.72 x 6.89 (inch)
GENERAL INFORMATION
AC Power
...................................................
120 V / 60 Hz
Dimensions (w x h x d)154 x 225.5 x 215 (mm)
..................................................
6.06 x 8.88 x 8.46 (inch)
Weight (with/without speakers)
..................................
...............................................................
approx. 6.3 / 3.3 kg
.............................................
approx. 13.86 / 7.26 pound
Standby power consumption
..........................
< 3 W
Specifications and external appearance are
subject to change without notice.